# packages

pkgId: b4cd75cff5ddd097ea524a5bd34c8e8f0e74c24c
name: ipw3945d
arch: src
version: 1.7.22
epoch: 0
release: 1.kwizart.fc7
summary: Regulatory Daemon for the Intel PRO/Wireless 3945ABG Network Connection
url: http://bughost.org/ipw3945/
rpm_license: distributable
rpm_vendor: kwizart
rpm_group: System Environment/Daemons
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ipw3945d-1.7.22-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  The regulatory daemon is responsible for controlling and configuring
  aspects of the hardware required to operate the device within
  compliance of various regulatory agencies.  This includes controlling
  which channels are allowed to do active/passive scanning, transmit
  power levels, which channels are allowed to be transmitted on, and
  support for IEEE 802.11h (DFS and TPC).


pkgId: 03407980f6d436223f659050fd1f6db9d963a18b
name: fxload
arch: src
version: 2002_04_11
epoch: 0
release: 1
summary: EZ-USB utility program
url: http://linux-hotplug.sourceforge.net/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: Applications/System
rpm_buildhost: Kwizart
rpm_packager: < kwizart at gmail.com >
location_href: fxload-2002_04_11-1.src.rpm
checksum_type: sha
description:
  This package contains utilities for downloading firmware to EZ-USB devices.
  EZ-USB devices use 8051-based microcontrollers that have been enhanced with
  registers, buffers, and other device-side support for USB transactions.

  It currently supports devices based on the Anchorchips EZ-USB, as well as the
  Cypress EZ-USB FX (which is almost completely source compatible) and EZ-USB FX2
  (which is not).  All of these support full speed (12 Mbit/sec) transfers.  The
  FX2 also supports high speed (480 Mbit/s) transfers, introduced in USB 2.0.

  This version of FXLOAD supports optional use of two-stage loading, where
  special device firmware is used to support writing into off-chip memory such
  as RAM (when firmware neeeds more than about 8 KBytes of code and data) or,
  for firmware development, I2C serial EEPROM.


pkgId: ee4851bd7200482d1e4e1c4b4e129ce3d01ff6bc
name: fsam7440-kmod
arch: src
version: 0.4
epoch: 0
release: 1.2.6.22.4_65.fc7
summary: RF Kill switch software button for Fujitsu-Siemens 7440
url: http://fsam7440.sourceforge.net
rpm_license: GPLv2
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: fsam7440-kmod-0.4-1.2.6.22.4_65.fc7.src.rpm
checksum_type: sha
description:
  This module allows change the status of wireless card's radio on
  Fujitsu-Siemens Amilo M 7440 and others.


pkgId: bc57bef292319aa3d37c277699e075153022d470
name: freevo
arch: src
version: 1.7.3
epoch: 0
release: 1.kwizart.fc7
summary: Freevo is an open-source home theatre
url: http://freevo.sourceforge.net/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: Applications/Multimedia
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: freevo-1.7.3-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  Freevo is a Linux application that turns a PC with a TV capture card
  and/or TV-out into a standalone multimedia jukebox/VCR. It builds on
  other applications such as xine, mplayer, tvtime and mencoder to play
  and record video and audio.


pkgId: 7d77a995feec36ff7d083676c894fc47089875a6
name: go7007-kmod
arch: src
version: 0.9.8
epoch: 0
release: 2.2.6.22.1_27.fc7
summary: Kernel module for wis-go7007 devices
url: http://oss.wischip.com/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: go7007-kmod-0.9.8-2.2.6.22.1_27.fc7.src.rpm
checksum_type: sha
description:
  This package contains the wis-go7007 driver, a linux device driver for usb
  video encoder and streammer


pkgId: cbd1fe033ca0c2a151a70c6fa6cd392ad9926038
name: fsaa1655g
arch: src
version: 1.0
epoch: 0
release: 1.kwizart.fc7
summary: The FSC Amilo A1655G uses only software switch to turn the radio on/off.
url: http://www.marvec.org/amilo/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: fsaa1655g-1.0-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  The fsaa1655g is a module for Linux Kernel 2.4/2.6 that allows change the
  status of wireless card's radio on Fujitsu-Siemens Amilo A1655G and L1310G.
  It is based on fsam7440.


pkgId: 90a9e11ff9d106aa6704e06e9f5b6ff7862aca93
name: hostapd
arch: src
version: 0.6
epoch: 0
release: 0.6.20070526.kwizart.fc7
summary: User space daemon for access point
url: http://hostap.epitest.fi/hostapd/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Daemons
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: hostapd-0.6-0.6.20070526.kwizart.fc7.src.rpm
checksum_type: sha
description:
  hostapd is a user space daemon for access point and authentication servers.
  It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP
  Authenticators, RADIUS client, EAP server, and RADIUS authentication server.
  The current version supports Linux (Host AP, madwifi, Prism54 drivers) and
  FreeBSD (net80211).

  hostapd is designed to be a "daemon" program that runs in the background and
  acts as the backend component controlling authentication. hostapd supports
  separate frontend programs and an example text-based frontend, hostapd_cli,
  is included with hostapd.


pkgId: 96d5da21683d94dd958197e777f7c56d2e87f8b5
name: ivtv-kmod
arch: src
version: 0.10.3
epoch: 0
release: 1.2.6.21_1.3194.fc7
summary: Linux kernel module for ivtv
url: http://ivtvdriver.org
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ivtv-kmod-0.10.3-1.2.6.21_1.3194.fc7.src.rpm
checksum_type: sha
description:
  Acer_acpi creates entries under /proc/acpi/acer, which enable you to control
  the wireless LAN card, inbuilt Bluetooth adapter, and mail LED of your laptop.


pkgId: c39e72ccec99b82f6f2f13fd52d5e61420c6c540
name: ivtv
arch: src
version: 0.10.3
epoch: 0
release: 1.kwizart.fc7
summary: Kernel module for ivtv
url: http://ivtvdriver.org
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ivtv-0.10.3-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  The primary goal of the IvyTV Project is to create a kernel driver for
  the iTVC15 familiy of MPEG codecs. The iTVC15 family includes the
  iTVC15 (CX24315) and iTVC16 (CX24316). These chips are commonly found
  on Hauppauge's WinTV PVR-250 and PVR-350 TV capture cards.


pkgId: 2b1ed9c317787d2e4860eb02602968c977e1eef8
name: RutilT
arch: src
version: 0.15
epoch: 0
release: 1.kwizart.fc7
summary: Diagnostic tools for Ralink Wireless devices
url: http://cbbk.free.fr/bonrom/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Base
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: RutilT-0.15-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  RutilT should work with any Linux wireless extension compliant kernel module.
  It also features special support for rt2400, rt2500 and rt2570 devices.


pkgId: cb1d94626eb63ff2b69430a910eca2df38df6504
name: kqemu-kmod
arch: src
version: 1.3.0
epoch: 0
release: 0.1.pre11.2.6.22.4_65.fc7
summary: The QEMU Accelerator Module (KQEMU)
url: http://fabrice.bellard.free.fr/qemu
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: kqemu-kmod-1.3.0-0.1.pre11.2.6.22.4_65.fc7.src.rpm
checksum_type: sha
description:
  The QEMU Accelerator Module increases the speed of QEMU when a PC is
  emulated on a PC. It runs most of the target application code directly
  on the host processor to achieve near native performance.


pkgId: 786c0565e76ae0903fc92188eb2f044d34263946
name: openjpeg
arch: src
version: 1.1.1
epoch: 0
release: 2.kwizart.fc7
summary: JPEG 2000 codec library
url: http://www.openjpeg.org/
rpm_license: BSD
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: openjpeg-1.1.1-2.kwizart.fc7.src.rpm
checksum_type: sha
description:
  The OpenJPEG library is an open-source JPEG 2000 codec written in C language.
  It has been developed in order to promote the use of JPEG 2000, the new
  still-image compression standard from the Joint Photographic Experts Group
  (JPEG).


pkgId: 8424f30d4e2150ceed15ebc62ae1474f462c4eca
name: xawtv4
arch: src
version: 4.0
epoch: 0
release: 0.1.pre.20070514.kwizart.fc7
summary: Video4Linux Stream Capture Viewer & Recorder
url: http://linux.bytesex.org/xawtv/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: Applications/Multimedia
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: xawtv4-4.0-0.1.pre.20070514.kwizart.fc7.src.rpm
checksum_type: sha
description:
  xawtv started as TV application for the bttv driver, because the Motif-based
  "xtvscreen" was the only TV application at this time. Alot has changed since:
      * The xawtv and bttv driver switched over to the video4linux interface.
      * Support for more interfaces was added: Xvideo Extention, the new
        video4linux2 interface and BSD Family video grabber driver (bktr).
      * xawtv isn't a single application any more, it is a small suite of
        video4linux related software, with video recording capabilities and
        serveral useful command line tools.
      * In the future even more hardware will be supported, the current
        development snapshots already have DVB support for example.


pkgId: 351471a2c5fa7c265d796080bd22be308e66c8cd
name: iwl4965-firmware
arch: src
version: 4.44.15
epoch: 0
release: 5
summary: Firmware for Intel® PRO/Wireless 4965 A/G/N network adaptors
url: http://intellinuxwireless.org/
rpm_license: Redistributable, no modification permitted
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: kwizatz.lan.ethernet
rpm_packager: < kwizart at gmail.com >
location_href: iwl4965-firmware-4.44.15-5.src.rpm
checksum_type: sha
description:
  This package contains the firmware required by the iwl4965 driver for Linux.
  Usage of the firmware is subject to the terms and conditions contained
  inside the provided LICENSE file. Please read it carefully.


pkgId: 9595e6e4ad2f80b3e5c88a14dfd5fcd2458b4669
name: rfswitch
arch: src
version: 1.1
epoch: 0
release: 1.kwizart.fc7
summary: Software part of the Radio Frequency kill switch.
url: http://rfswitch.sourceforge.net/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: rfswitch-1.1-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This project enables users to change the status of their wireless cards' radio on
  laptops which do not use a hardware based wireless radio switch.
  This is the common part.


pkgId: c7b3e672961e24a287f2106a7bcdf7d26dafa0dd
name: rfswitch-kmod
arch: src
version: 1.1
epoch: 0
release: 1.2.6.22.9_91.fc7
summary: Software part of the Radio Frequency kill switch.
url: http://rfswitch.sourceforge.net/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: rfswitch-kmod-1.1-1.2.6.22.9_91.fc7.src.rpm
checksum_type: sha
description:
  This project enables users to change the status of their wireless cards' radio on
  laptops which do not use a hardware based wireless radio switch.


pkgId: 884027ce32c7a64a20fd3b13594fb838de120880
name: acer_acpi
arch: src
version: 0.7
epoch: 0
release: 1.kwizart.fc7
summary: Linux kernel module to allow control of Acer Laptops
url: http://code.google.com/p/aceracpi/
rpm_license: GPLv2
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: acer_acpi-0.7-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  Acer_acpi creates entries under /proc/acpi/acer, which enable you to control
  the wireless LAN card, inbuilt Bluetooth adapter, and mail LED of your laptop.
  This is the common part.


pkgId: 3586cc24a5c76a3a884e6d09e6150c8202c8ebc2
name: libgii
arch: src
version: 1.0.2
epoch: 0
release: 1.kwizart.fc7
summary: Input library for GGI
url: http://www.ggi-project.org/packages/libgii.html
rpm_license: LGPL
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: libgii-1.0.2-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  LibGII is based on the concept of input streams, which virtualize access
  to the underlying input drivers. Events from various input devices are
  abstracted into easy-to-use structures. LibGII also allows the application to
  join streams together, receiving input from an arbitrary combination of
  devices. LibGII is a separate component from LibGGI, although LibGGI
  depends on LibGII for input purposes.


pkgId: 10049ac085adae27d308c08a12e4730c2bf74a81
name: acerhk
arch: src
version: 0.5.35
epoch: 0
release: 2.kwizart.fc7
summary: Acer Hotkey driver
url: http://www.cakey.de/acerhk/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: acerhk-0.5.35-2.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This package contains the driver for managing special buttons and wireless
  antenna on Acer and compatible laptops.


pkgId: a8087c813299931feb2abdb17b2becc24b276950
name: gnutls
arch: src
version: 1.6.1
epoch: 0
release: 1
summary: A TLS protocol implementation.
url: http://www.gnutls.org/
rpm_license: LGPL
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: gnutls-1.6.1-1.src.rpm
checksum_type: sha
description:
  GnuTLS is a project that aims to develop a library which provides a secure
  layer, over a reliable transport layer. Currently the GnuTLS library implements
  the proposed standards by the IETF's TLS working group.


pkgId: b4e74d18da7812c4ddbf64bd28c7d565ac988f24
name: ipw3945-ucode
arch: src
version: 1.14.2
epoch: 0
release: 1.kwizart.fc7
summary: Firmware for the Intel PRO/Wireless 3945ABG/3945BG ipw3945 driver
url: http://bughost.org/ipw3945/
rpm_license: Distributable
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ipw3945-ucode-1.14.2-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This package contains the firmware needed by the ipw3945 driver.

  Usage of the firmware is subject to the terms contained in
  /usr/share/doc/ipw3945-ucode-1.14.2/LICENSE. Please read
  the license carefully.


pkgId: c792a296316f606f2d9398a85303a1f87b7aa8d1
name: ffmpeg-compat
arch: src
version: 0.4.9
epoch: 0
release: 0.39.20070503.kwizart.fc7
summary: Digital VCR and streaming server
url: http://ffmpeg.org/
rpm_license: GPLv2+
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ffmpeg-compat-0.4.9-0.39.20070503.kwizart.fc7.src.rpm
checksum_type: sha
description:
  FFMpeg is a complete and free Internet live audio and video
  broadcasting solution for Linux/Unix. It also includes a digital
  VCR. It can encode in real time in many formats including MPEG1 audio
  and video, MPEG4, h263, ac3, asf, avi, real, mjpeg, and flash.


pkgId: 9ef1accac9e04bfeb7271ddae542ff1a12ba2c01
name: ipw3945-kmod
arch: src
version: 1.2.1
epoch: 1
release: 3.2.6.21_1.3228.fc7
summary: Intel PRO/Wireless 3945ABG/3945BG driver for Linux
url: http://ipw3945.sourceforge.net/
rpm_license: GPL/BSD
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ipw3945-kmod-1.2.1-3.2.6.21_1.3228.fc7.src.rpm
checksum_type: sha
description:
  This package contains kernel drivers for ipw3945.
  This RPM contains a binary Linux kernel module build for %{kernel}.


pkgId: 9755a0d5641e7317d1b8130ffa4a48a674ba2d82
name: ftgl
arch: src
version: 2.1.2
epoch: 0
release: 2.kwizart.fc7
summary: OpenGL frontend to Freetype 2
url: http://homepages.paradise.net.nz/henryj/code/index.html#FTGL
rpm_license: LGPL
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: ftgl-2.1.2-2.kwizart.fc7.src.rpm
checksum_type: sha
description:
  FTGL is a free open source library to enable developers to use arbitrary
  fonts in their OpenGL (www.opengl.org)  applications.
  Unlike other OpenGL font libraries FTGL uses standard font file formats
  so doesn't need a preprocessing step to convert the high quality font data
  into a lesser quality, proprietary format.
  FTGL uses the Freetype (www.freetype.org) font library to open and 'decode'
  the fonts. It then takes that output and stores it in a format most
  efficient for OpenGL rendering.


pkgId: f6396117aaf8790a8cb0a71d1eb75c68f900bcf3
name: rt61-firmware
arch: src
version: 1.2
epoch: 0
release: 3.kwizart.fc7
summary: Firmware for RT2561/RT2661 wireless devices
url: http://www.ralinktech.com
rpm_license: Redistributable, no modification permitted
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: rt61-firmware-1.2-3.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This package contains the firmware required by the rt61pci driver for Linux.
  This package contains the Ralink rt61 firmware for WiFi, a linux
  device driver for 802.11a/b/g universal NIC cards - either Cardbus, PCI or
  MiniPCI - that use RT2561/RT2661 chipsets.


pkgId: 4a2389b510f8891d354200a5071f67813ef25ef2
name: metisse
arch: src
version: 0.4.0
epoch: 0
release: 0.3.20070725cvs.kwizart.fc7
summary: Metisse a 3D X Desktop
url: http://insitu.lri.fr/metisse
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: User Interface/Desktops
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: metisse-0.4.0-0.3.20070725cvs.kwizart.fc7.src.rpm
checksum_type: sha
description:
  Metisse is an experimental X desktop with some OpenGL capacity.  It
  consists of a virtual X server called Xmetisse, a special version of FVWM,
  and a FVWM module FvwmCompositor. Xmetisse is a mix of Xvnc and XDarwin. It
  draws nothing on your screen; everything is drawn into
  pixmaps. Similarly to Xvnc, but with a different protocol, Xmetisse can
  send these pixmaps (and other information) to a "viewer". FvwmCompositor
  is such a viewer; it uses OpenGL for rendering the X desktop into a
  window of a "regular" 3D accelerated X server.


pkgId: a62e7793603acf5b4fd621789418a3bdae0efa4f
name: libggi
arch: src
version: 2.2.2
epoch: 0
release: 2.kwizart.fc7
summary: GGI (General Graphics Interface) toolkit
url: http://www.ggi-project.org/packages/libggi.html
rpm_license: LGPL
rpm_vendor: kwizart
rpm_group: System Environment/Libraries
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: libggi-2.2.2-2.kwizart.fc7.src.rpm
checksum_type: sha
description:
  LibGGI is the central library in the GGI project, hence the name.

  It provides an opaque interface to the display's acceleration functions.
  It was originally intended to allow user programs to interface with KGI,
  the GGI Kernel Graphics Interface, but other display types can be easily
  used by loading the appropriate "display target" (e.g. X, memory).

  LibGGI consists of a main library (libggi.so) and a multitude of dynamic
  drivers. The library then loads the necessary "drivers" for the requested
  mode, taking hints from the graphics device if necessary. LibGGI can also
  load extension libraries, e.g. to provide enhanced 2D and 3D functions.


pkgId: 5037c8bffe4dde1ff83949d7b8a076da51c5c9de
name: fsam7440
arch: src
version: 0.4
epoch: 0
release: 1.kwizart.fc7
summary: RF Kill switch software button for Fujitsu-Siemens
url: http://fsam7440.sourceforge.net
rpm_license: GPLv2
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: fsam7440-0.4-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This module allows change the status of wireless card's radio on
  Fujitsu-Siemens Amilo M 7440 and others.
  This is the common part.


pkgId: 814a6a837b7f7dd3d52ed76fe7c9f7e98f95a4f8
name: rt71w-firmware
arch: src
version: 1.8
epoch: 0
release: 3.kwizart.fc7
summary: Firmware for RT71 802.11 wireless devices
url: http://www.ralinktech.com
rpm_license: Redistributable, no modification permitted
rpm_vendor: kwizart
rpm_group: System Environment/Kernel
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: rt71w-firmware-1.8-3.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This package contains the firmware required by the rt73usb driver for Linux.
  This package contains the Ralink rt71w firmware for WiFi, a linux
  device driver for 802.11a/b/g universal NIC cards - USB Devices - that use
  RT2571W/RT2671 chipsets.


pkgId: d9a8d2cc2e7f42a685b9e872cf2acb2c97f630eb
name: xdtv
arch: src
version: 2.4.0
epoch: 0
release: 1.kwizart.fc7
summary: Video4Linux Stream Capture Viewer & Recorder
url: http://xawdecode.sourceforge.net/
rpm_license: GPL
rpm_vendor: kwizart
rpm_group: Applications/Multimedia
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: xdtv-2.4.0-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  XdTV is a software that allows you to to record & watch TV.
  It interacts with AleVT for Teletext and Nxtvepg for NextView,
  and uses the video4linux API. It can use some deinterlacing filters
  and can record video files in various containers (AVI, MPEG, OGG, etc.)
  with many codecs (FFMpeg(>=0.4.6), XviD(0.9 & 1.x),
  Ogg Theora (>=1.0alpha5) & Vorbis and DivX4/5).
  It has also some plugin capabilities.


pkgId: dfb00873be99654ada22edf15c6186b2ef041d67
name: rfsam
arch: src
version: 0.1
epoch: 0
release: 1.kwizart.fc7
summary: RF switch for the Fujitsu Siemens Amilo M 7400
url: http://zwobbl.homelinux.net/
rpm_license: GPLv2
rpm_vendor: kwizart
rpm_group: Applications/System
rpm_buildhost: Kwizatz
rpm_packager: < kwizart at gmail.com >
location_href: rfsam-0.1-1.kwizart.fc7.src.rpm
checksum_type: sha
description:
  This is the first release of the RF switch software for the Fujitsu Siemens
  Amilo M 7400 (and other notebooks) in userspace, so there is no need anymore
  to get the module compiled after kernel upgrade


